.webp)
Why the Kirin DA182T Plus Is Engineered for High-Speed, Large-Scale Textile Demands
The Kirin DA182T Plus is a High-Speed Roll-to-Roll Dye Sublimation Digital Textile Printer built for operations where printing speed and output volume are the primary constraints on business growth. Its headline figure — 650 m²/hr at 400×600 dpi 1PASS with 8 Kyocera industrial print heads — is a genuine industrial throughput specification that positions the DA182T Plus well above standard 4-head or 6-head sublimation printers competing in the same category.
Kirin positions the DA182T Plus around the tagline “High-Speed Performance for Large-Scale Demands” — a description that reflects the machine’s design intent: serve garment manufacturers, home textile producers, and large-format fabric printing studios that have outgrown narrower, slower sublimation printers and need a single high-throughput platform to consolidate production. At 1850mm print width with a supported paper width of 1900mm, the DA182T Plus covers the full range of standard textile roll widths in a single pass.
The DA182T Plus achieves its speed and quality through four engineering decisions: Kyocera industrial print heads chosen specifically for high daily output, a unique drive and ink supply system for precise droplet control, an infrared light-tube drying system for media stability, and a large-capacity floor-mounted ink supply that reduces ink replacement frequency and supports thin paper printing down to a minimum of 31 g/m².
Technical Specifications: Full Kirin DA182T Plus Parameter Table
The DA182T Plus operates across three resolution and speed modes — High Speed, General, and Quality — each available in 1PASS, 2PASS, and 3PASS variants. All data below is taken directly from the official Kirin DA182T Plus brochure:
| Specification | DA182T Plus |
|---|---|
| Model | DA182T Plus |
| Max. Print Width (mm) | 1850 |
| Max. Paper Width (mm) | 1900 |
| Print Heads | Kyocera Print Heads: 8H |
| Max. Diameter of Internal | Ø1000 | 1200 Kg (10km roll) |
| Ink Type | Disperse, high temperature disperse, Pigment ink |
| Ink Color | C, M, Y, K, O, R, B, GR, Lk, Lm, Lc, FM, FY |
| Print Medium | Sublimation paper / Stamp paper / Film paper / Wallpaper |
| Drying Method | Infrared light-tube type drying system |
| Supported Image Types | JPG / TIFF / BMP / others |
| Weight (kg) | 2500 (without packing box) |
| Operating Temperature | 20–30°C |
| Mode | Resolution (dpi) | Printing Speed (m²/hr) |
|---|---|---|
| High Speed Mode 1 | 400×600 dpi — 1 pass | 650 |
| High Speed Mode 2 | 508×600 dpi — 1 pass | 540 |
| High Speed Mode 3 | 600×600 dpi — 1 pass | 480 |
| General Mode 1 | 400×1200 dpi — 2 pass | 325 |
| General Mode 2 | 508×1200 dpi — 2 pass | 270 |
| General Mode 3 | 600×1200 dpi — 2 pass | 240 |
| Quality Mode 1 | 400×1800 dpi — 3 pass | 217 |
| Quality Mode 2 | 508×1800 dpi — 3 pass | 180 |
| Quality Mode 3 | 600×1800 dpi — 3 pass | 160 |
Mode Selection Note: The DA182T Plus offers genuine multi-mode flexibility across 9 speed/resolution combinations. High Speed Mode 1 at 650 m²/hr maximises throughput for bulk transfer paper and fabric production runs where resolution demands are moderate. Quality Mode 3 at 160 m²/hr with 600×1800 dpi (3 pass) delivers image-level print quality for colour-critical fashion and premium home textile applications — at a speed that still outperforms many competing 4-head and 6-head sublimation printers at their own maximum 1PASS rates. The DA182T Plus supports a very wide ink colour range including C, M, Y, K, O, R, B, GR, Lk, Lm, Lc, FM, FY — enabling extended gamut textile printing on a single platform.
What 650 m²/h and 8 Kyocera Industrial Print Heads Deliver in Practice
The DA182T Plus’s 650 m²/h throughput is not simply the result of adding more heads — it is the product of combining Kyocera industrial head technology with a purpose-built drive system and ink supply engineered specifically for the demands of high-duty-cycle textile sublimation production.
8 Kyocera Industrial Print Heads — Designed for High Daily Output
The DA182T Plus is designed for high daily output, using industrial Kyocera print heads combined with a specialized control system to maximize productivity and significantly boost overall printing efficiency. Kyocera print heads are a well-established choice in industrial textile printing for their high native firing frequency, durability under sustained high-duty-cycle operation, and compatibility with the disperse ink types used in sublimation textile printing. With 8 heads spanning the 1850mm print width, the DA182T Plus achieves coverage consistency and speed that single-row 4-head configurations physically cannot match.
Unique Drive and Ink Supply System for Precise Droplet Control
The DA182T Plus uses a unique drive and ink supply system to ensure precise droplet control, delivering image-level print quality with various disperse inks. In sublimation textile printing, droplet precision determines dye saturation uniformity across the full print width — inconsistent droplet placement creates visible density variations and colour banding on printed fabric. The DA182T Plus’s drive system addresses this directly, maintaining droplet consistency at all speed modes from 650 m²/h down to 160 m²/h.
1850mm Print Width — 1900mm Maximum Paper Width
The DA182T Plus’s 1850mm print width with a 1900mm maximum paper width accommodates the full range of standard textile sublimation roll widths in a single pass. For home textile production (curtain fabric, bedding, upholstery) and wide garment panel printing, eliminating narrow-roll seaming is a direct cost and labour saving. The machine supports internal roll diameters up to Ø1000mm and roll weights up to 1200 kg (10 km roll) — enabling long uninterrupted production runs without roll changes.
Media tip: The DA182T Plus supports a minimum paper weight of 31 g/m² — a capability enabled by the large-capacity floor-mounted ink supply system that reduces ink pressure variation during printing. This thin-paper support is critical for sublimation operations working with lightweight transfer papers for fast heat press transfer to delicate fabrics. The machine’s 2500 kg body weight (without packing box) reflects the structural engineering required to maintain printhead stability and media transport accuracy at 650 m²/h across full-length 10km rolls.
Four Features That Make the Kirin DA182T Plus More Than a Fast Sublimation Printer
Beyond the headline speed figure, the DA182T Plus incorporates four engineering features that address the operational realities of sustained high-volume textile sublimation production.
Superior Print Heads for Higher Productivity
Designed for high daily output, the DA182T Series uses industrial Kyocera print heads and a specialized control system to maximize productivity and significantly boost overall printing efficiency. Kyocera’s industrial-grade heads are specifically engineered for the sustained duty cycles required in continuous textile production environments — not the lighter duty cycles of office or general commercial printing equipment. The DA182T Plus’s 8-head configuration delivers the head-count productivity that enables the 650 m²/h maximum throughput while maintaining the ink droplet precision required for quality textile sublimation output across all nine printing modes.
High-Speed, High-Definition Output
The DA182T Series uses a unique drive and ink supply system to ensure precise droplet control, delivering image-level print quality with various disperse inks. This is the feature that resolves the typical speed-versus-quality trade-off seen in lower-tier sublimation printers: the DA182T Plus’s drive system maintains droplet precision at all nine speed and resolution modes, from 650 m²/h High Speed Mode 1 to 160 m²/h Quality Mode 3 (600×1800 dpi). For textile printers producing both bulk volume orders and colour-critical premium fabric work on the same machine, this multi-mode quality range directly reduces the need to own multiple printers for different job types.
Shown with Ingenuity, Easy to Operate
The automatic cleaning and moisturizing systems reduce print head blockages, improving output stability and allowing the machine to be operated by just one person. In high-volume textile production, printhead maintenance downtime is a direct cost — every hour a machine is stopped for manual head cleaning is an hour of lost production at 650 m²/h. The DA182T Plus’s automatic cleaning and moisturizing system minimises this risk by maintaining head condition proactively during and between print runs, reducing operator intervention and enabling single-operator machine management even during long continuous production shifts.
Reduce Printing Cost, Impeccable Output
The large-capacity floor-mounted ink supply reduces ink replacement frequency and supports printing on thin paper (minimum 31g/m²), cutting material waste and printing costs from proofing to mass production. For high-volume textile operations, ink supply management is one of the most significant operational costs and interruption risks. The DA182T Plus’s floor-mounted large-capacity ink supply system minimises both by holding substantially more ink than standard bulk systems, reducing the frequency of operator attention during production runs and enabling the machine to sustain 650 m²/h output continuously without ink-change interruptions.
Who Should Invest in the Kirin DA182T Plus?
The DA182T Plus is designed for garment manufacturers, fashion fabric printers, home textile producers, and high-volume sublimation print service providers that need 650 m²/h industrial speed, 1850mm wide-format coverage, and multi-mode quality flexibility on a single platform. Here is where it makes the strongest business case:
Fashion brands and sportswear manufacturers printing custom fabric for garment production benefit from the DA182T Plus’s 650 m²/h output, 1850mm print width, and broad ink colour support (C, M, Y, K, O, R, B, GR, Lk, Lm, Lc, FM, FY). The extended ink colour range enables wide gamut fabric printing for fashion applications where brand colours and seasonal palette reproduction accuracy matters — while the High Speed modes sustain the bulk fabric throughput needed to supply active garment production lines without creating a printing bottleneck.
Producers of curtain fabric, bedding, cushion fabric, table linen, and upholstery material benefit from the DA182T Plus’s 1850mm print width, which covers standard home textile roll widths in a single pass without seaming, and its support for sublimation paper, stamp paper, film paper, and wallpaper media types. At 650 m²/h, bulk home textile orders for retailers and interior brands can be fulfilled at throughput rates that are not achievable with 4-head or 6-head sublimation printers.
Print shops producing backlit fabric displays, tension fabric frame graphics, exhibition banners, and event fabric for large-format display applications benefit from the DA182T Plus’s combination of 1850mm wide-format coverage and quality mode output at 160 m²/h (600×1800 dpi, 3PASS). Quality Mode output at this resolution delivers the colour uniformity and gradient smoothness required for large-format display fabric viewed at close range, while the High Speed modes keep the same machine productive for volume sublimation transfer paper runs between premium jobs.
Sublimation print service providers producing large volumes of printed transfer paper for heat press operations benefit from the DA182T Plus’s 650 m²/h High Speed Mode 1 output and 10km roll support. The large-capacity floor-mounted ink supply minimises production interruptions for ink changes during long-roll transfer paper runs, and thin paper support down to 31 g/m² enables cost-efficient use of lightweight sublimation transfer paper stock — reducing material cost per square metre on high-volume transfer paper jobs.
Final Verdict: Strengths and Honest Limitations
After a thorough review of the Kirin DA182T Plus specifications, feature engineering, and production application range, here is our balanced assessment for textile fabric printers and high-volume sublimation operations evaluating this machine.
Strengths
- 650 m²/hr maximum speed at 400×600 dpi 1PASS — genuine industrial-grade dye sublimation throughput with 8 Kyocera industrial print heads
- Nine printing modes across High Speed, General, and Quality tiers (650 down to 160 m²/hr) — one machine covers bulk production and colour-critical premium fabric jobs
- 1850mm print width with 1900mm maximum paper width covers all standard textile roll widths in a single pass — eliminates seaming waste and labour
- Supports rolls up to Ø1000mm diameter / 1200 kg / 10km length for long uninterrupted production runs without roll changes
- Broad ink colour support (C, M, Y, K, O, R, B, GR, Lk, Lm, Lc, FM, FY) enables extended gamut fabric printing on a single platform
- Large-capacity floor-mounted ink supply reduces ink replacement frequency and supports thin paper down to minimum 31 g/m²
- Automatic cleaning and moisturizing systems reduce head blockages and allow single-operator machine management
- Infrared light-tube type drying system ensures transfer paper exits the machine correctly dried for consistent sublimation press transfer
- Supports sublimation paper, stamp paper, film paper, and wallpaper — flexible media compatibility for diverse textile and interior applications
- Supports JPG, TIFF, BMP, and other image formats — compatible with standard RIP and design software workflows
- Available through Kelin Philippines with local technical support, demonstration, and service access
Limitations
- Machine weight of 2500 kg (without packing box) requires professional site preparation, reinforced flooring assessment, and dedicated installation planning
- Operating temperature range of 20–30°C requires a climate-controlled production environment — open warehouse or non-climate-controlled spaces are not suitable
- Print medium is limited to transfer paper types for dye sublimation (not direct-to-fabric) — downstream sublimation press equipment is required for fabric transfer
- Managing nine print modes and the extended ink colour configuration requires professional colour profiling, ICC profile management, and RIP software expertise to fully leverage the machine’s output quality range
- Capital investment is significantly higher than 4-head or 6-head sublimation printers — best justified by operations with sustained high-volume textile and fabric printing demand
- Industrial power supply requirements must be confirmed for the facility before purchase — site electrical infrastructure assessment is required pre-installation